Safety protocols to follow while using shot blasting machine.
Shot blasting using stainless steel round cut wire shot is a popular method to clean the surfaces of metal sheets. If you have a shot blasting machine, then we suggest that you should follow certain safety protocols to minimize the chances of accidents at your workstation. In the shot blasting machine, cut wire abrasives are projected at high speed on metal surfaces. Therefore, if you do not take adequate precautions, then these cut wire shots projectiles can seriously injure the operator or anybody else who is standing nearby.
In this article, we will lay out certain safety precautions that should be followed while using cut wire shot blasting machines so that the operator of the machine as well as others around it could be protected.
Hearing protection
In shot blasting machines, small steel projectiles are fired at high speed on metal surfaces to either clean them or change their properties. As metal surfaces hit, the sound emitted is quite high. An operator who is in close vicinity should always wear high-quality hearing protection like earplugs or earmuffs to protect their ears from such loud sounds.
Goggles
During the shot blasting process, the abrasives are thrown at high speed on the metal sheet from which a layer of material needs to be physically removed. Therefore, it becomes important that you should have proper protection for your eyes (like using goggles). As metal flying fragments that are formed during this violent process may damage your eyes, you should have the proper protection to keep your eyes safe.
Masks
Just like your ears and eyes, you should also protect your lungs during the shot blasting process. During this process, every minute fragments of metals and dust would be emitted. These minute particles can travel through your breathing tract to reach your lungs and damage them. Therefore, everyone who is present in the room where the shot blasting process is taking place should wear proper masks to prevent inhaling harmful materials.
Protective clothing
The shot blasting process is used to remove the top damaged layer of a metal sheet or any other hard materials. These hard materials if meets your skin can cause severe allergic reactions. To prevent this, you should wear proper protective clothing like gloves and long-sleeved overalls. This will ensure that there is minimal contact with the abrasive materials that are released during this process with your skin.
Safe area
the area where the shot blasting process is going on must be restricted to authorized personnel only. Furthermore, the room should be closed off so that the dust all the metal fragments that are released during this process are contained in a particular area.
Shot blasting is an extremely useful way to clean hard surfaces. If you follow the safety protocols that we have shared with you in this article, then you will be able to carry this work without any harm coming to your operators or anybody who works nearby.
Resource: https://www.zonearticles.com/safety-protocols-to-follow-while-using-shot-blasting-machine/
